Canon EOS M2 - W Direct Printing of Print-Ordered Images

281
With a PictBridge printer, you can easily
print images with DPOF.
1 Prepare to print.
 See page 268.
Follow the “Connecting the Camera to a Printer” procedure up to step 5.
2 Under the [x1] tab, select [Print order].
3 Select [Print].
 [Print] will be displayed only if the camera is connected to a printer and
printing is possible.
4Set the [Paper settings] (p.270).
 Set the printing effects (p.273) if necessary.
5 Select [OK].
W Direct Printing of Print-Ordered Images
 Before printing, be sure to set the paper size.
 Certain printers cannot imprint the file number.
 If [Bordered] is set, certain printers may imprint the date on the border.
 Depending on the printer, the date may appear faint if it is imprinted on a
bright background or on the border.
 Under [Adjust levels], [Manual] cannot be selected.
 If you stopped the printing and want to resume printing the remaining images,
select [Resume]. Note that printing will not resume if you stop the printing and
any of the following occurs:
• Before resuming the printing, you changed the print order or deleted print-
ordered images.
• When you set the index, you changed the paper settings before resuming
the printing.
• When you paused the printing, the card’s remaining capacity was low.
 If a problem occurs during printing, see page 277.