Canon EOS M2 - Set the Date and Time

3 Setting the Date, Time, and Zone
42
4
Set the date and time.
 Press the <Y> <Z> keys to select the
number.
 Press <0> so <a> is displayed.
 Press the <W> <X> keys to set the
number, then press <0>. (Returns to
<b>.)
5
Set the daylight saving time.
 Set it if necessary.
 Press the <Y> <Z> keys to select [Y].
 Press <0> so <a> is displayed.
 Press the <W> <X> keys to select [Z],
then press <0>.
 When the daylight saving time is set to
[Z], the time set in step 4 will advance
by 1 hour. If [Y] is set, the daylight
saving time will be canceled and the time
will go back by 1 hour.
6
Exit the setting.
 Press the <Y> <Z> keys to select [OK],
then press <0>.
 The date/time/zone and daylight saving
time will be set and the menu will
reappear.
The date/time/zone settings may be reset in the following cases. If this happens,
set the date/time/zone again.
• When the camera is stored without the battery.
• When the camera’s battery becomes exhausted.
• When the camera is exposed to below freezing temperatures for a prolonged
period.
 The date/time that was set will start from when you press <0> in step 6.
 After changing the time zone, check that the correct date/time has been set.