Canon EOS M2 - Page 274

wPrinting
274
5
Set the date and file number
imprinting.
 Set it if necessary.
 Select [I], then press <0>.
 Set as desired, then press <0>.
6
Set the number of copies.
 Set it if necessary.
 Select [R], then press <0>.
 Select the number of copies, then press
<0>.
7
Start printing.
 Select [Print], then press <0>.
 The [Default] setting for printing effects and other options are the printer’s
own default settings as set by the printer’s manufacturer. Refer to the printer’s
instruction manual to find out what the [Default] settings are.
 Depending on the image’s file size and image-recording quality, it may take
some time for the printing to start after you select [Print].
 If image tilt correction (p.276) is applied, it may take longer to print the image.
 To stop the printing, press <0> while [Stop] is displayed, then select [OK].
 If you execute [Clear all camera settings] (p.220), all the settings will revert
to their defaults.