303
3 Setting Speedlite Functionst
Flash exposure bracketing (FEB)
While the flash output is changed
automatically, three shots are taken.
For details, refer to the instruction manual of
a Speedlite compatible with flash exposure
bracketing.
When using second-curtain synchronization, set the shutter speed to 1/25 sec.
or slower. If the shutter speed is 1/30 sec. or faster, first-curtain synchronization
will be used automatically even if [Second-curtain synchronization] is set.
With an EX-series Speedlite not compatible with flash function settings, you
can only set the following: [Flash firing], [E-TTL II meter.], and [Flash
exposure compensation] under [Flash function settings]. ([Shutter
synchronization] can also be set with certain EX-series Speedlites.)
If flash exposure compensation is set with the Speedlite, you cannot set the
flash exposure compensation on the camera (with the flash function settings).
If it is set with both the camera and Speedlite, the Speedlite’s setting overrides
the camera’s.
To Next Page
