91
Shoot by Lighting or Scene Type
4
Take the picture.
Press the shutter button.
If you change the shooting mode or set
the power to <2>, the setting will
revert back to [r Default setting].
Lighting or Scene Type Settings
r Default setting
Default setting suited for most subjects.
t Daylight
For subjects under sunlight. Gives more natural-looking blue skies and
greenery and reproduces light-colored flowers better.
u Shade
For subjects in the shade. Suitable for skin tones, which may look too
bluish, and for light-colored flowers.
v Cloudy
For subjects under overcast skies. Makes skin tones and landscapes,
which may otherwise look dull on a cloudy day, look warmer. Also
effective for light-colored flowers.
w Tungsten light
For subjects under tungsten lighting. Reduces the reddish-orange color
cast caused by tungsten lighting.
x Fluorescent light
For subjects under fluorescent lighting. Suited for all types of fluorescent
lighting.
y Sunset
Suitable when you want to capture the sunset’s impressive colors.
When using a flash, the setting will switch to [r Default setting]. (However,
the shooting information will display the lighting or scene type that was set.)
If you want to set this together with [Ambience-based shots], set the [Light/
scene-based shots] that best matches the ambience you have set. In the
case of [Sunset] for example, warm colors will become prominent so the
ambience you set may not work well.
To Next Page
Loading...
