Canon GP605 User Manual

COPYRIGHT © 1999 CANON INC. CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8
FIXING SYSTEM
This chapter provides descriptions on the copier's fixing operations, functions of
each operation, relationships between electrical and mechanical systems, and
timing at which each associated part is turned on.
I. OPERATIONS ............................8-1
A. Outline....................................8-1
B. Basic Sequence of Operations
(fixing system)........................8-4
II. FIXING DRIVE SYSTEM ............8-5
A. Outline....................................8-5
B. Controlling the Fixing Roller Drive
Mechanism.............................8-6
C. Controlling the Cleaning Belt
Drive Mechanism ...................8-8
D. Controlling the Fixing Inlet Guide
Drive Mechanism ...................8-9
E. Controlling the Thermistor
Reciprocating Mechanism ...8-10
F. Controlling the Upper Separation
Claw Reciprocating Mechanism
.............................................8-11
III. CONTROLLING THE FIXING
TEMPERATURE .......................8-12
A. Outline..................................8-12
B. Down Sequence Control......8-13
C. Controlling Temperature by Mode
8-14
D. Error Detection.....................8-18
IV. CONTROLLING THE FIXING
ROLLER BIAS ..........................8-24
A. Outline..................................8-24
V. DISASSEMBLY/ASSEMBLY ....8-25
A. Fixing Assembly...................8-26
B. Fixing Roller Cleaning Assembly
.............................................8-29
C. Fixing Heater and Control Parts
.............................................8-32
D. Fixing Roller Assembly ........8-37
E. Separation Claw Assembly..8-42
F. Delivery Assembly ...............8-43
G. Paper Sensors .....................8-46

Canon GP605 Specifications

General

Brand	Canon
Model	GP605
Category	Copier
Language	English