Canon GP605 - Fan; Removing the Inverter Cooling

COPYRIGHT © 1999 CANON INC. CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
9-41
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
Figure 9-C716
[4]
[6]
[5]
[5]
Figure 9-C717
4) Disconnect the connector [4], and remove
the three screws [5]; then, detach the drum
fan [6].
Caution:
When mounting the drum fan, be sure
that the direction of air current matches
the marking indicated on the fan.
9. Removing the Inverter Cooling
Fan
1) Remove the rear cover.
2) Remove the two screws [1], and slide out
the inverter fan [2].
Caution:
When mounting the inverter cooling fan,
be sure that the direction of air current
matches the marking indicated on the
fan.
[1]
[1]
[2]