4
When the process is finished, "Completed! Turn Power Off!!" is dis-
played.
Press the Power button and turn off the printer.
Pack the printer
Refer to the Setup Guide for details on packing the printer and installing it after transfer.
1
Disconnect the power cord and interface cable.
Important
• Unplug the power cord once the power is turned off. Unplugging the printer before it is off and moving it may cause
damage. If you accidentally unplug the printer before turning it off, plug it in again, reinstall the ink tank, and per-
form the procedure again.
2
Open the Top Cover.
3
Pinch the Belt together, insert it between the Belt Stop-
per, and affix the Belt Stopper to the Carriage Shaft.
Preparing to Transfer the Printer
iPF6400S
User's Guide
Maintenance and Consumables Other Maintenance
926
To Next Page
Loading...
