Removing the Spectrophotometer Sensor and White Calibration Tile
1
Turn the printer off.
(See "Turning the Printer On and Off.") âž” P.21
2
Open the Spectrophotometer Unit Cover.
3
Press down on the center (near the blue label) of the
Up-down Unit to lower the Up-down Unit.
4
Open the Up-down Unit cover.
iPF6400S
Replacing the Spectrophotometer Sensor of the Spectrophotometer Unit (option)
User's Guide
Maintenance and Consumables Other Maintenance
929
To Next Page
Loading...
Need help?
General