8
Remove the Spectrophotometer Sensor.
Important
•
Never touch the sensor area of the Spectrophotometer Sensor.
If the sensor area is dirty, the printer may not be able to obtain the
correct color measurement results.
When handling the Spectrophotometer Sensor, hold it by the blue
part on the side.
9
Move the White Calibration Tile Holder in the direction
of the arrow and remove it from the Up-down Unit.
iPF6400S
Replacing the Spectrophotometer Sensor of the Spectrophotometer Unit (option)
User's Guide
Maintenance and Consumables Other Maintenance
931
To Next Page
Loading...
Need help?
General