Canon LBP7110Cw - Page 150

If you want to improve the toner fixation when printed with [Envelope] selected, select [Envelope H].
*5
If either setting causes the following problems and so on, specify the other setting to print.
Output paper curls.
Residual images appear on non-printed areas.
The toner does not fix onto paper well, and the printing comes out faint.
NOTE
About [Apply Device Settings]
Selecting [Apply Device Settings] uses the [Paper Type] setting in the [Paper Source Settings] dialog box in the Printer
Status Window.
(For details on the procedure for setting [Paper Type] in the [Paper Source Settings] dialog box, see "Registering the
Paper Size and Type.")
When [Apply Device Settings] is selected with the [Paper Type] setting set to [Free] in the [Paper Source
Settings] dialog box, the job is printed as [Plain 1].
8
Specify the other printing preferences as needed.
"Useful Printing Functions" describes the printing procedures that use the various printing functions. Make full use of
the functions of this printer.
NOTE
For details on the settings
See Help.
"How to Use Help"
9
Confirm the settings, then click [OK].
ĺ The [Print] dialog box reappears.
10
Click [OK].
ĺ The printer starts printing.
If the printer cannot print properly
"Printing Cannot Be Performed (USB Connection)"
"Printing Cannot Be Performed (Wired LAN Connection)"
"Printing Cannot Be Performed (Wireless LAN Connection) (LBP7110Cw Only)"
"Printing Cannot Be Performed (via the Print Server)"
㻝㻡㻜㻌㻛㻌㻡㻝㻠
Downloaded from ManualsPrinter.com Manuals