M-Series Operator’s Manual 4/9/15 1-6
How to unlock software features or unlock your Control
The following are necessary to unlock software features:
1. If you are at the "Demo mode expired" screen, start at step 4.
2. Go to the Main screen of the Control software.
3. Press F7 "Utility" and then F8 "Option"
4. Press F1 "Unlock Option". (You may need to enter the password – usually 137)
5. Next, type in the Unlock # and press ENTER.
6. Then, type in the Unlock Value and press ENTER.
7. Repeat step 4, 5, and 6 for each new Unlock.
To Next Page
Loading...
