Cisco Catalyst 3750 - Page 6

Contents
vi
Catalyst 3750 Metro Switch Software Configuration Guide
78-15870-01
Configuring a System Name and Prompt 5-15
Default System Name and Prompt Configuration 5-15
Configuring a System Name 5-15
Configuring a System Prompt 5-16
Understanding DNS 5-16
Default DNS Configuration 5-17
Setting Up DNS 5-17
Displaying the DNS Configuration 5-18
Creating a Banner 5-18
Default Banner Configuration 5-18
Configuring a Message-of-the-Day Login Banner 5-19
Configuring a Login Banner 5-20
Managing the MAC Address Table 5-20
Building the Address Table 5-21
MAC Addresses and VLANs 5-21
Default MAC Address Table Configuration 5-21
Changing the Address Aging Time 5-22
Removing Dynamic Address Entries 5-22
Configuring MAC Address Notification Traps 5-23
Adding and Removing Static Address Entries 5-24
Displaying Address Table Entries 5-25
Managing the ARP Table 5-26
CHAPTER 6 Configuring SDM Templates 6-1
Understanding the SDM Templates 6-1
Configuring the Switch SDM Template 6-2
Default SDM Template 6-2
SDM Template Configuration Guidelines 6-3
Setting the SDM Template 6-3
Displaying the SDM Templates 6-4
CHAPTER 7 Configuring Switch-Based Authentication 7-1
Preventing Unauthorized Access to Your Switch 7-1
Protecting Access to Privileged EXEC Commands 7-2
Default Password and Privilege Level Configuration 7-2
Setting or Changing a Static Enable Password 7-3
Protecting Enable and Enable Secret Passwords with Encryption 7-3
Disabling Password Recovery 7-5
Setting a Telnet Password for a Terminal Line 7-6