28-46
Catalyst 3750 Metro Switch Software Configuration Guide
78-15870-01
Chapter 28 Configuring IP Unicast Routing
Configuring BGP
IP prefix list None defined.
Multi exit discriminator (MED) Always compare: Disabled. Does not compare MEDs for paths from neighbors in
different autonomous systems.
Best path compare: Disabled.
MED missing as worst path: Disabled.
Deterministic MED comparison is disabled.
Neighbor These are default neighbor settings:
• Advertisement interval: 30 seconds for external peers; 5 seconds for internal peers.
• Change logging: Enabled.
• Conditional advertisement: Disabled.
• Default originate: No default route is sent to the neighbor.
• Description: None.
• Distribute list: None defined.
• External BGP multihop: Only directly connected neighbors are allowed.
• Filter list: None used.
• Maximum number of prefixes received: No limit.
• Next hop (router as next hop for BGP neighbor): Disabled.
• Password: Disabled.
• Peer group: None defined; no members assigned.
• Prefix list: None specified.
• Remote AS (add entry to neighbor BGP table): No peers defined.
• Private AS number removal: Disabled.
• Route maps: None applied to a peer.
• Send community attributes: None sent to neighbors.
• Shutdown or soft reconfiguration: Not enabled.
• Timers: keepalive: 60 seconds; holdtime: 180 seconds.
• Update source: Best local address.
• Version: BGP version 4.
• Weight: Routes learned through BGP peer: 0; routes sourced by the local router:
32768.
Route reflector None configured.
Synchronization (BGP and IGP) Enabled.
Table map update Disabled.
Timers Keepalive: 60 seconds
Holdtime: 180 seconds.
Table 28-10 Default BGP Configuration (continued)
Feature Default Setting
To Next Page
Loading...
