Index
IN-17
Catalyst 3750 Metro Switch Software Configuration Guide
78-15870-01
IP multicast routing (continued)
See also IGMP
See also PIM
IP phones
and QoS
12-1
automatic classification and queueing 26-29
configuring 12-4
ensuring port security with QoS 26-46
trusted boundary for QoS 26-46
IP precedence 26-2
IP-precedence-to-DSCP map for QoS 26-60
IP protocols in ACLs 25-10
IP routes, monitoring 28-100
IP routing
connecting interfaces with
9-6
enabling 28-17
IP traceroute
executing
34-12
overview 34-11
IP unicast routing
address resolution
28-7
administrative distances 28-89, 28-98
ARP 28-8
assigning IP addresses to Layer 3 interfaces 28-5
authentication keys 28-99
broadcast
address
28-15
flooding 28-15
packets 28-12
storms 28-12
classless routing 28-6
configuring static routes 28-88
default
addressing configuration
28-4
gateways 28-10
networks 28-89
routes 28-89
routing 28-2
IP unicast routing (continued)
directed broadcasts
28-13
dynamic routing protocols 28-2
enabling 28-17
EtherChannel Layer 3 interface 28-3
IGP 28-28
inter-VLAN 28-2
IP addressing
classes
28-5
configuring 28-4
IRDP 28-11
Layer 3 interfaces 28-3
MAC address and IP address 28-7
passive interfaces 28-97
protocols
distance-vector
28-2
dynamic 28-2
link-state 28-2
proxy ARP 28-8
redistribution 28-90
reverse address resolution 28-7
routed ports 28-3
static routing 28-2
steps to configure 28-3
subnet mask 28-5
subnet zero 28-6
supernet 28-6
UDP 28-14
with SVIs 28-3
See also BGP
See also EIGRP
See also IGRP
See also IS-IS
See also OSPF
See also RIP
IRDP
configuring
28-11
definition 28-11
To Next Page
