Cisco Catalyst 3750 - Page 9

Contents
ix
Catalyst 3750 Metro Switch Software Configuration Guide
78-15870-01
EtherChannel Port Groups 9-5
Connecting Interfaces 9-5
Using Interface Configuration Mode 9-6
Procedures for Configuring Interfaces 9-7
Configuring a Range of Interfaces 9-8
Configuring and Using Interface Range Macros 9-9
Configuring Ethernet Interfaces 9-11
Default Ethernet Interface Configuration 9-11
Configuring Interface Speed and Duplex Mode 9-12
Configuration Guidelines 9-13
Setting the Interface Speed and Duplex Parameters 9-13
Configuring IEEE 802.3z Flow Control 9-15
Configuring Auto-MDIX on a Port 9-16
Adding a Description for an Interface 9-17
Configuring Layer 3 Interfaces 9-18
Configuring the System MTU 9-19
Monitoring and Maintaining the Interfaces 9-20
Monitoring Interface Status 9-20
Clearing and Resetting Interfaces and Counters 9-21
Shutting Down and Restarting the Interface 9-22
CHAPTER 10 Configuring VLANs 10-1
Understanding VLANs 10-1
Supported VLANs 10-3
VLAN Port Membership Modes 10-3
Configuring Normal-Range VLANs 10-4
Token Ring VLANs 10-6
Normal-Range VLAN Configuration Guidelines 10-6
VLAN Configuration Mode Options 10-7
VLAN Configuration in config-vlan Mode 10-7
VLAN Configuration in VLAN Database Configuration Mode 10-7
Saving VLAN Configuration 10-7
Default Ethernet VLAN Configuration 10-8
Creating or Modifying an Ethernet VLAN 10-9
Deleting a VLAN 10-11
Assigning Static-Access Ports to a VLAN 10-11