Index
IN-21
Catalyst 3750 Metro Switch Software Configuration Guide
78-15870-01
monitoring (continued)
network traffic for analysis with probe
21-2
OSPF 28-36
port
blocking
18-14
protection 18-14
RP mapping information 31-22
source-active messages 32-19
speed and duplex mode 9-14
traffic flowing among switches 22-1
traffic suppression 18-14
tunneling 13-16
VLAN
filters
25-38
maps 25-38
VLANs 10-16
VMPS 10-33
VTP 11-16
MP-BGP 30-12
MPLS
configuring
30-7
default configuration 30-6
experimental field 30-19
label 30-2
monitoring 30-22
QoS
configuring
30-20
default configuration 30-20
experimental bits 30-19
uses 30-18
VPN
labels
30-3
packet flow 30-11
MSDP
benefits of
32-3
clearing MSDP connections and statistics 32-19
MSDP (continued)
controlling source information
forwarded by switch
32-12
originated by switch 32-8
received by switch 32-14
default configuration 32-4
dense-mode regions
sending SA messages to
32-17
specifying the originating address 32-18
filtering
incoming SA messages
32-14
SA messages to a peer 32-12
SA requests from a peer 32-11
join latency, defined 32-6
meshed groups
configuring
32-16
defined 32-16
originating address, changing 32-18
overview 32-1
peer-RPF flooding 32-2
peers
configuring a default
32-4
monitoring 32-19
peering relationship, overview 32-1
requesting source information from 32-8
shutting down 32-16
source-active messages
caching
32-6
clearing cache entries 32-19
defined 32-2
filtering from a peer 32-11
filtering incoming 32-14
filtering to a peer 32-12
limiting data with TTL 32-14
monitoring 32-19
restricting advertised sources 32-9
To Next Page
