Cisco Catalyst 3750 - Page 914

Index
IN-32
Catalyst 3750 MetroSwitch Software Configuration Guide
78-15870-01
route maps
BGP
28-52
policy-based routing 28-94
router ACLs
defined
25-2
types of 25-3
route reflectors, BGP 28-60
router ID, OSPF 28-35
route selection, BGP 28-50
route summarization, OSPF 28-33
route targets, VPN 28-78
routing
default
28-2
dynamic 28-2
redistribution of information 28-90
static 28-2
routing domain confederation, BGP 28-59
Routing Information Protocol
See RIP
routing protocol administrative distances
28-89
RSPAN
characteristics
21-8
configuration guidelines 21-16
default configuration 21-9
destination ports 21-7
displaying status 21-23
interaction with other features 21-8
monitored ports 21-5
monitoring ports 21-7
overview 21-1
received traffic 21-4
session limits 21-10
sessions
creating
21-17
defined 21-3
limiting source traffic to specific VLANs 21-22
specifying monitored ports 21-17
with ingress traffic enabled 21-20
RSPAN (continued)
source ports
21-5
transmitted traffic 21-5
VLAN-based 21-6
RSTP
active topology, determining
15-6
BPDU
format
15-9
processing 15-10
designated port, defined 15-6
designated switch, defined 15-6
interoperability with 802.1D
described
15-5
restarting migration process 15-22
topology changes 15-10
overview 15-6
port roles
described
15-6
synchronized 15-8
proposal-agreement handshake process 15-7
rapid convergence
described
15-7
edge ports and Port Fast 15-7
point-to-point links 15-7, 15-22
root ports 15-7
root port, defined 15-6
See also MSTP
running configuration, saving
3-10
S
scheduled reloads 3-15
scheduling
egress hierarchical queues
CBWFQ
26-28, 26-86
LLQ 26-29, 26-97
shaping 26-29, 26-99