Cisco Catalyst 3750 - Page 916

Index
IN-34
Catalyst 3750 MetroSwitch Software Configuration Guide
78-15870-01
SNMP (continued)
default configuration
24-6
engine ID 24-6
groups 24-6, 24-8
host 24-6
informs
and trap keyword
24-10
described 24-5
differences from traps 24-5
enabling 24-13
limiting access by TFTP servers 24-13
limiting system log messages to NMS 23-9
manager functions 24-3
MIBs
location of
A-3
supported A-1
notifications 24-5
overview 24-1, 24-4
status, displaying 24-15
system contact and location 24-13
trap manager, configuring 24-12
traps
described
24-3, 24-5
differences from informs 24-5
enabling 24-10
enabling MAC address notification 5-23
overview 24-1, 24-4
types of 24-10
users 24-6, 24-8
versions supported 24-2
SNMPv1 24-2
SNMPv2C 24-2
SNMPv3 24-2
snooping, IGMP 17-2
software images
location in flash memory
B-20
recovery procedures 34-2
scheduling reloads 3-15
tar file format, described B-20
See also downloading and uploading
source addresses, in ACLs
25-10
source-and-destination-IP address based forwarding,
EtherChannel
27-7
source-and-destination MAC address forwarding,
EtherChannel
27-7
source-IP address based forwarding, EtherChannel 27-7
source-MAC address forwarding, EtherChannel 27-7
SPAN
configuration guidelines
21-10
default configuration 21-9
destination ports 21-7
displaying status 21-23
interaction with other features 21-8
monitored ports 21-5
monitoring ports 21-7
overview 21-1
received traffic 21-4
session limits 21-10
sessions
configuring ingress forwarding
21-14, 21-21
creating 21-11
defined 21-3
limiting source traffic to specific VLANs 21-15
removing destination (monitoring) ports 21-12
specifying monitored ports 21-11
with ingress traffic enabled 21-13
source ports 21-5
transmitted traffic 21-5
VLAN-based 21-6