Index
IN-37
Catalyst 3750 Metro Switch Software Configuration Guide
78-15870-01
stratum, NTP 5-2
stub areas, OSPF 28-32
subnet mask 28-5
subnet zero 28-6
success response, VMPS 10-28
summer time 5-13
SunNet Manager 1-2
supernet 28-6
SVIs
and IP unicast routing
28-3
and router ACLs 25-3
connecting VLANs 9-5
defined 9-4
routing between VLANs 10-2
switch console port 1-3
Switch Database Management
See SDM
switched packets, ACLs on
25-35
Switched Port Analyzer
See SPAN
switched ports
9-2
switchport block multicast command 18-6
switchport block unicast command 18-6
switchport command 9-11
switchport mode dot1q-tunnel command 13-6
switchport protected command 18-5
switch priority
MSTP
15-19
STP 14-19
switch software features 1-1
switch virtual interface
See SVI
synchronization, BGP
28-47
syslog
See system message logging
system clock
configuring
daylight saving time
5-13
manually 5-11
summer time 5-13
time zones 5-12
displaying the time and date 5-12
overview 5-2
See also NTP
system message logging
default configuration
23-3
defining error message severity levels 23-8
disabling 23-4
displaying the configuration 23-12
enabling 23-4
facility keywords, described 23-11
level keywords, described 23-8
limiting messages 23-9
message format 23-2
overview 23-1
sequence numbers, enabling and disabling 23-7
setting the display destination device 23-4
synchronizing log messages 23-5
timestamps, enabling and disabling 23-7
UNIX syslog servers
configuring the daemon
23-10
configuring the logging facility 23-11
facilities supported 23-11
system MTU
and 802.1Q tunneling
13-5
and EoMPLS 30-14
and IS-IS LSPs 28-70
configuring 9-19
maximum size supported 9-19
system name
default configuration
5-15
default setting 5-15
manual configuration 5-15
See also DNS
To Next Page
