Cisco ME 3400 - Page 1096

Index
IN-10
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
default configuration (continued)
system name and prompt 5-15
TACACS+ 7-13
UDLD 25-4
VLAN, Layer 2 Ethernet interfaces 11-16
VLANs 11-7
VMPS 11-25
default gateway 3-14, 35-10
default networks 35-98
default router preference
See DRP
default routes 35-98
default routing 35-2
default service, DSCP 33-8
default template 6-1
denial-of-service attacks, preventing 32-1
description command 9-22
designing your network, examples 1-14
destination addresses
in IPv6 ACLs 37-5
destination addresses, in IPv4 ACLs 31-11
destination-IP address-based forwarding,
EtherChannel
34-8
destination-MAC address forwarding, EtherChannel 34-7
device discovery protocol 23-1, 24-1
DHCP
DHCP for IPv6
See DHCPv6
DHCP, enabling the relay agent 19-10
DHCP-based autoconfiguration
client request message exchange 3-4
configuring
client side 3-3
DNS 3-7
relay device 3-7
server side 3-6
TFTP server 3-6
example 3-9
DHCP-based autoconfiguration (continued)
lease options
for IP address information 3-6
for receiving the configuration file 3-6
overview 3-3
relationship to BOOTP 3-3
relay support 1-4, 1-9
support for 1-3
DHCP-based autoconfiguration and image update
configuring 3-10 to 3-13
understanding 3-4 to 3-5
DHCP binding database
See DHCP snooping binding database
DHCP binding table
See DHCP snooping binding database
DHCP object tracking, configuring primary
interface
40-11
DHCP option 82
circuit ID suboption 19-5
configuration guidelines 19-8
default configuration 19-8
displaying 19-15
forwarding address, specifying 19-10
helper address 19-10
overview 19-3
packet format, suboption
circuit ID 19-5
remote ID 19-5
remote ID suboption 19-5
DHCP server port-based address allocation
configuration guidelines 19-16
default configuration 19-16
described 19-15
displaying 19-18
enabling 19-16