Index
IN-16
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Flex Links
configuration guidelines 18-8
configuring 18-8, 18-9
configuring preferred VLAN 18-11
configuring VLAN load balancing 18-10
default configuration 18-7
description 18-1
link load balancing 18-2
monitoring 18-14
VLANs 18-2
flooded traffic, blocking 22-8
flow control 1-2, 9-20
forward-delay time
MSTP 15-23
STP 14-22
Forwarding Information Base
See FIB
FTP
accessing MIB files A-3
configuration files
downloading B-13
overview B-12
preparing the server B-13
uploading B-14
image files
deleting old image B-31
downloading B-29
preparing the server B-28
uploading B-31
G
general query 18-5
Generating IGMP Reports 18-3
get-bulk-request operation 29-3
get-next-request operation 29-3, 29-4
get-request operation 29-3, 29-4
get-response operation 29-3
global configuration mode 2-2
global leave, IGMP 21-11
H
hardware limitations and Layer 3 interfaces 9-23
hello time
MSTP 15-23
STP 14-21
help, for the command line 2-3
history
changing the buffer size 2-5
described 2-4
disabling 2-5
recalling commands 2-5
history table, level and number of syslog messages 28-10
host ports
configuring 12-11
kinds of 12-2
hosts, limit on dynamic ports 11-28
Hot Standby Router Protocol
See HSRP
HP OpenView 1-3
HSRP
authentication string 38-10
command-switch redundancy 1-6
configuration guidelines 38-5
configuring 38-5
default configuration 38-5
definition 38-1
monitoring 38-12
object tracking 40-7
overview 38-1
priority 38-7
routing redundancy 1-9
support for ICMP redirect messages 38-12
timers 38-10
tracking 38-8
HTTP(S) Over IPv6 36-7