Index
IN-19
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
interfaces (continued)
displaying information about 9-26
flow control 9-20
management 1-3
monitoring 9-26
naming 9-22
physical, identifying 9-8
range of 9-9
restarting 9-28
shutting down 9-28
status 9-26
supported 9-8
types of 9-1
interfaces range macro command 9-10
interface types 9-8
ENI 9-2
NNI 9-2
UNI 9-2
Interior Gateway Protocol
See IGP
Intermediate System-to-Intermediate System
See IS-IS
internal BGP
See IBGP
internal neighbors, BGP 35-46
Internet Control Message Protocol
See ICMP
Internet Group Management Protocol
See IGMP
Internet Protocol version 6
See IPv6
inter-VLAN routing 1-9, 35-2
Intrusion Detection System
See IDS appliances
inventory management TLV 24-6
IP ACLs
for QoS classification 33-10
implicit deny 31-9, 31-13
implicit masks 31-9
IP ACLs (continued)
named 31-14
undefined 31-20
IP addresses
128-bit 36-2
classes of 35-5
default configuration 35-4
discovering 5-29
for IP routing 35-3
IPv6 36-2
MAC address association 35-7
monitoring 35-16
IP broadcast address 35-14
ip cef distributed command 35-96
IP directed broadcasts 35-12
ip igmp profile command 21-25
IP information
assigned
manually 3-14
through DHCP-based autoconfiguration 3-3
default configuration 3-3
IP multicast routing
addresses
all-hosts 42-2
all-multicast-routers 42-2
host group address range 42-2
administratively-scoped boundaries, described 42-44
and IGMP snooping 21-1
Auto-RP
adding to an existing sparse-mode cloud 42-24
benefits of 42-24
clearing the cache 42-46
configuration guidelines 42-10
filtering incoming RP announcement
messages
42-27
overview 42-6
preventing candidate RP spoofing 42-27
To Next Page
Loading...
