Index
IN-22
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
IP unicast routing (continued)
IP addressing
classes 35-5
configuring 35-3
IPv6 36-2
IRDP 35-10
Layer 3 interfaces 35-3
MAC address and IP address 35-7
passive interfaces 35-106
proxy ARP 35-7
redistribution 35-99
reverse address resolution 35-7
routed ports 35-3
static routing 35-2
steps to configure 35-3
subnet mask 35-5
subnet zero 35-5
supernet 35-6
UDP 35-13
with SVIs 35-3
See also BGP
See also EIGRP
See also IS-IS
See also OSPF
See also RIP
IPv4 ACLs
applying to interfaces 31-19
extended, creating 31-10
named 31-14
standard, creating 31-9
IPv6
ACLs
displaying 37-8
limitations 37-3
matching criteria 37-3
port 37-2
precedence 37-2
router 37-2
supported 37-2
IPv6 (continued)
ACLs (continued)
addresses 36-2
address formats 36-2
applications 36-5
assigning address 36-9
autoconfiguration 36-4
CEFv6 36-17
default configuration 36-9
default router preference (DRP) 36-4
defined 36-1
Enhanced Interior Gateway Routing Protocol (EIGRP)
IPv6
36-6
Router ID 36-6
feature limitations 36-7
features not supported 36-7
forwarding 36-9
ICMP 36-4
neighbor discovery 36-4
OSPF 36-6
path MTU discovery 36-4
SDM templates 6-2, 37-1
Stateless Autoconfiguration 36-4
supported features 36-2
switch limitations 36-7
understanding static routes 36-6
IPv6 traffic, filtering 37-3
IRDP
configuring 35-11
definition 35-10
support for 1-9
IS-IS
addresses 35-62
area routing 35-62
default configuration 35-63
monitoring 35-71
show commands 35-71
support for 1-9
system routing 35-62
To Next Page
Loading...
