Cisco ME 3400 - Page 1121

Index
IN-35
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Q
QinQ
See IEEE 802.1Q tunneling
QoS
aggregate policers 33-16
and MQC 33-1
basic model 33-2
CBWFQ 33-23
CBWFQ, configuring 33-54
class-based shaping, described 33-21
classification
ACL lookup 33-10
based on CoS value 33-8
based on DSCP 33-8
based on IP precedence 33-8
based on QoS group 33-10
based on VLAN IDs 33-12, 33-48
class maps, described 33-7
comparisons 33-9
criteria 33-5
in frames and packets 33-6
policy maps, described 33-15
class maps, configuration guidelines 33-34
class maps, configuring 33-34
configuration examples
adding customers 33-68
adding or deleting a class 33-71
adding or deleting classification criteria 33-68,
33-69
adding or deleting configured actions 33-70
changing queuing or scheduling
parameters
33-70
configuration guidelines
aggregate policers 33-44
CBWFQ 33-54
class-based shaping 33-56
class maps 33-34
general 33-30
QoS (continued)
individual policers 33-39
input policy maps 33-38
marking 33-46
output policy maps 33-53
unconditional priority policing 33-60
WTD 33-63
configuring
aggregate policers 33-44
class-based shaping 33-56
classification with IP ACLs 33-31
class maps 33-34, 33-35
individual policers 33-40
individual policing 33-39, 33-50
input policy maps with marking 33-46
IP ACLs 33-31
MAC ACLs 33-33
output policy maps 33-52
port shaping 33-57
priority queues 33-58
queue size 33-26
requirements 33-29
service policies 33-38
strict priority queuing 33-58
table maps 33-37
unconditional priority policing 33-60
WTD 33-62, 33-63
congestion avoidance 33-2, 33-26
congestion management 33-2, 33-20
CPU-generated traffic
configuring output policy classification
criteria
33-5
configuring QoS group number 33-11
configuring queue-limit 33-63
marking and queuing 33-20
output remarking 33-6
QoS groups 33-20
default configuration 33-30
initial configuration example 33-66