Index
IN-43
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
static access ports
assigning to VLAN 11-11
defined 9-4, 11-5
static addresses
See addresses
static IP routing 1-9
static MAC addressing 1-7
static route primary interface,configuring 40-10
static routes
understanding 36-6
static routes, configuring 35-97
static routing 35-2
static SSM mapping 42-18, 42-20
static traffic forwarding 42-21
static VLAN membership 11-2
statistics
802.1x 8-24
CDP 23-5
interface 9-26
IP multicast routing 42-46
LLDP 24-8
LLDP-MED 24-8
OSPF 35-34
RMON group Ethernet 27-5
RMON group history 27-5
SNMP input and output 29-22
sticky learning 22-9
storm control
configuring 22-3
described 22-1
disabling 22-5
displaying 22-18
support for 1-2
thresholds 22-1
STP
and REP 17-6
STP (continued)
BPDU filtering
described 16-3
disabling 16-9
enabling 16-8
BPDU guard
described 16-3
disabling 16-8
enabling 16-7
BPDU message exchange 14-3
configuration guidelines 14-12, 16-6
configuring
forward-delay time 14-22
hello time 14-21
maximum aging time 14-22
path cost 14-19
port priority 14-17
root switch 14-15
secondary root switch 14-17
spanning-tree mode 14-14
switch priority 14-20
counters, clearing 14-23
default configuration 14-11
default optional feature configuration 16-5
designated port, defined 14-4
designated switch, defined 14-4
disabling 14-15
displaying status 14-23
EtherChannel guard
described 16-3
disabling 16-10
enabling 16-9
extended system ID
effects on root switch 14-15
effects on the secondary root switch 14-17
overview 14-4
unexpected behavior 14-16
features supported 1-5
IEEE 802.1D and bridge ID 14-4
To Next Page
Loading...
