Cisco ME 3400 - Page 1128

Index
IN-42
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
SPAN
configuration guidelines 26-10
default configuration 26-9
destination ports 26-6
displaying status 26-22
interaction with other features 26-8
monitored ports 26-5
monitoring ports 26-6
overview 1-10, 26-1
ports, restrictions 22-11
received traffic 26-4
session limits 26-10
sessions
configuring ingress forwarding 26-14, 26-20
creating 26-10
defined 26-3
limiting source traffic to specific VLANs 26-14
removing destination (monitoring) ports 26-12
specifying monitored ports 26-10
with ingress traffic enabled 26-13
source ports 26-5
traffic 26-4
transmitted traffic 26-5
VLAN-based 26-6
spanning tree and native VLANs 11-16
Spanning Tree Protocol
See STP
speed, configuring on interfaces 9-15
SRR, support for 1-8
SSH
configuring 7-38
cryptographic software image 7-37
described 1-4, 7-37
encryption methods 7-38
user authentication methods, supported 7-38
SSM
address management restrictions 42-15
CGMP limitations 42-16
components 42-14
configuration guidelines 42-15
configuring 42-13, 42-16
differs from Internet standard multicast 42-14
IGMP snooping 42-16
IGMPv3 42-14
IGMPv3 Host Signalling 42-15
IP address range 42-14
monitoring 42-16
operations 42-14
PIM 42-14
state maintenance limitations 42-16
SSM mapping
configuration guidelines 42-17
configuring 42-17, 42-19
defined 42-17
DNS-based 42-18, 42-20
monitoring 42-22
overview 42-17
restrictions 42-17
static 42-18, 42-20
static traffic forwarding 42-21
standby ip command 38-6
standby links 18-2
standby router 38-1
standby timers, HSRP 38-10
startup configuration
booting
manually 3-18
specific image 3-18
clearing B-19
configuration file
automatically downloading 3-17
specifying the filename 3-17
default boot configuration 3-17