Index
IN-41
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
shutdown command on interfaces 9-28
shutdown threshold for Layer 2 protocol packets 13-11
Simple Network Management Protocol
See SNMP
small-frame arrival rate, configuring 22-5
SMNP traps, and CFM 41-4
SNAP 23-1
SNMP
accessing MIB variables with 29-4
agent
described 29-4
disabling 29-8
and IP SLAs 39-2
authentication level 29-11
community strings
configuring 29-8
overview 29-4
configuration examples 29-21
default configuration 29-7
engine ID 29-7
groups 29-7, 29-10
host 29-7
ifIndex values 29-5
in-band management 1-4
informs
and trap keyword 29-12
described 29-5
differences from traps 29-5
disabling 29-16
enabling 29-16
limiting access by TFTP servers 29-17
limiting system log messages to NMS 28-10
manager functions 1-3, 29-3
MIBs
location of A-3
supported A-1
notifications 29-5
overview 29-1, 29-4
security levels 29-3
SNMP (continued)
setting CPU threshold notification 29-16
status, displaying 29-22
system contact and location 29-17
trap manager, configuring 29-14
traps
described 29-3, 29-5
differences from informs 29-5
disabling 29-16
enabling 29-12
enabling MAC address notification 5-23
overview 29-1, 29-4
types of 29-12
users 29-7, 29-10
versions supported 29-2
SNMP traps
REP 17-13
SNMPv1 29-2
SNMPv2C 29-2
SNMPv3 29-3
snooping, IGMP 21-1
software images
location in flash B-23
recovery procedures 44-2
scheduling reloads 3-21
tar file format, described B-24
See also downloading and uploading
source addresses
in IPv6 ACLs 37-5
source addresses, in IPv4 ACLs 31-11
source-and-destination-IP address based forwarding,
EtherChannel
34-8
source-and-destination MAC address forwarding,
EtherChannel
34-7
source-IP address based forwarding, EtherChannel 34-8
source-MAC address forwarding, EtherChannel 34-7
Source-specific multicast
See SSM