Contents
xxii
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Default SNMP Configuration 29-7
SNMP Configuration Guidelines 29-7
Disabling the SNMP Agent 29-8
Configuring Community Strings 29-8
Configuring SNMP Groups and Users 29-10
Configuring SNMP Notifications 29-12
Setting the CPU Threshold Notification Types and Values 29-16
Setting the Agent Contact and Location Information 29-17
Limiting TFTP Servers Used Through SNMP 29-17
Configuring MIB Data Collection and Transfer 29-18
Configuring the Cisco Process MIB CPU Threshold Table 29-20
SNMP Examples 29-21
Displaying SNMP Status 29-22
CHAPTER
30 Configuring Embedded Event Manager 30-1
Understanding Embedded Event Manager 30-1
Event Detectors 30-2
Embedded Event Manager Actions 30-4
Embedded Event Manager Policies 30-4
Embedded Event Manager Environment Variables 30-4
Configuring Embedded Event Manager 30-5
Registering and Defining an Embedded Event Manager Applet 30-5
Registering and Defining an Embedded Event Manager TCL Script 30-6
Displaying Embedded Event Manager Information 30-6
CHAPTER
31 Configuring Network Security with ACLs 31-1
Understanding ACLs 31-1
Supported ACLs 31-2
Port ACLs 31-3
Router ACLs 31-4
VLAN Maps 31-5
Handling Fragmented and Unfragmented Traffic 31-5
Configuring IPv4 ACLs 31-6
Creating Standard and Extended IPv4 ACLs 31-7
IPv4 Access List Numbers 31-8
ACL Logging 31-8
Creating a Numbered Standard ACL 31-9
Creating a Numbered Extended ACL 31-10
Resequencing ACEs in an ACL 31-14
To Next Page
Loading...
