Contents
xxiii
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Creating Named Standard and Extended ACLs 31-14
Using Time Ranges with ACLs 31-16
Including Comments in ACLs 31-18
Applying an IPv4 ACL to a Terminal Line 31-18
Applying an IPv4 ACL to an Interface 31-19
Hardware and Software Treatment of IP ACLs 31-20
Troubleshooting ACLs 31-21
IPv4 ACL Configuration Examples 31-22
Numbered ACLs 31-23
Extended ACLs 31-23
Named ACLs 31-24
Time Range Applied to an IP ACL 31-24
Commented IP ACL Entries 31-25
ACL Logging 31-25
Creating Named MAC Extended ACLs 31-26
Applying a MAC ACL to a Layer 2 Interface 31-28
Configuring VLAN Maps 31-29
VLAN Map Configuration Guidelines 31-29
Creating a VLAN Map 31-30
Examples of ACLs and VLAN Maps 31-31
Applying a VLAN Map to a VLAN 31-33
Using VLAN Maps in Your Network 31-33
Wiring Closet Configuration 31-33
Denying Access to a Server on Another VLAN 31-34
Using VLAN Maps with Router ACLs 31-35
VLAN Maps and Router ACL Configuration Guidelines 31-36
Examples of Router ACLs and VLAN Maps Applied to VLANs 31-37
ACLs and Switched Packets 31-37
ACLs and Routed Packets 31-37
ACLs and Multicast Packets 31-38
Displaying IPv4 ACL Configuration 31-39
CHAPTER
32 Configuring Control-Plane Security 32-1
Understanding Control-Plane Security 32-1
Configuring Control-Plane Security 32-5
Monitoring Control-Plane Security 32-7
To Next Page
Loading...
