Cisco ME 3400 - Page 27

Contents
xxvii
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Enabling IPv4 Unicast Routing 35-17
Configuring RIP 35-17
Default RIP Configuration 35-18
Configuring Basic RIP Parameters 35-19
Configuring RIP Authentication 35-20
Configuring Split Horizon 35-21
Configuring Summary Addresses 35-21
Configuring OSPF 35-22
Default OSPF Configuration 35-24
Nonstop Forwarding Awareness 35-25
Configuring Basic OSPF Parameters 35-25
Configuring OSPF Interfaces 35-26
Configuring OSPF Network Types 35-27
Configuring OSPF for Nonbroadcast Networks 35-27
Configuring Network Types for OSPF Interfaces 35-28
Configuring OSPF Area Parameters 35-29
Configuring Other OSPF Parameters 35-31
Changing LSA Group Pacing 35-32
Configuring a Loopback Interface 35-33
Monitoring OSPF 35-34
Configuring EIGRP 35-34
Default EIGRP Configuration 35-36
Nonstop Forwarding Awareness 35-37
Configuring Basic EIGRP Parameters 35-37
Configuring EIGRP Interfaces 35-38
Configuring EIGRP Route Authentication 35-39
Configuring EIGRP Stub Routing 35-40
Monitoring and Maintaining EIGRP 35-41
Configuring BGP 35-42
Default BGP Configuration 35-44
Nonstop Forwarding Awareness 35-46
Enabling BGP Routing 35-46
Managing Routing Policy Changes 35-48
Configuring BGP Decision Attributes 35-50
Configuring BGP Filtering with Route Maps 35-52
Configuring BGP Filtering by Neighbor 35-52
Configuring Prefix Lists for BGP Filtering 35-54
Configuring BGP Community Filtering 35-55
Configuring BGP Neighbors and Peer Groups 35-56