Cisco ME 3400 - Page 31

Contents
xxxi
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Configuring HSRP Priority 38-7
Configuring MHSRP 38-10
Configuring HSRP Authentication and Timers 38-10
Enabling HSRP Support for ICMP Redirect Messages 38-12
Displaying HSRP Configurations 38-12
CHAPTER 39 Configuring Cisco IOS IP SLAs Operations 39-1
Understanding Cisco IOS IP SLAs 39-1
Using Cisco IOS IP SLAs to Measure Network Performance 39-3
IP SLAs Responder and IP SLAs Control Protocol 39-4
Response Time Computation for IP SLAs 39-4
IP SLAs Operation Scheduling 39-5
IP SLAs Operation Threshold Monitoring 39-5
Configuring IP SLAs Operations 39-6
Default Configuration 39-6
Configuration Guidelines 39-6
Configuring the IP SLAs Responder 39-7
Analyzing IP Service Levels by Using the UDP Jitter Operation 39-8
Analyzing IP Service Levels by Using the ICMP Echo Operation 39-11
Monitoring IP SLAs Operations 39-13
CHAPTER 40 Configuring Enhanced Object Tracking 40-1
Understanding Enhanced Object Tracking 40-1
Configuring Enhanced Object Tracking Features 40-2
Default Configuration 40-2
Tracking Interface Line-Protocol or IP Routing State 40-2
Configuring a Tracked List 40-3
Configuring a Tracked List with a Boolean Expression 40-4
Configuring a Tracked List with a Weight Threshold 40-5
Configuring a Tracked List with a Percentage Threshold 40-6
Configuring HSRP Object Tracking 40-7
Configuring Other Tracking Characteristics 40-8
Configuring IP SLAs Object Tracking 40-8
Configuring Static Routing Support 40-10
Configuring a Primary Interface 40-10
Configuring a Cisco IP SLAs Monitoring Agent and Track Object 40-11
Configuring a Routing Policy and Default Route 40-12
Monitoring Enhanced Object Tracking 40-12