Cisco ME 3400 - Page 32

Contents
xxxii
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
CHAPTER 41 Configuring Ethernet OAM, CFM, and E-LMI 41-1
Understanding Ethernet CFM 41-2
CFM Domain 41-2
Maintenance Points 41-3
CFM Messages 41-4
Crosscheck Function 41-4
SNMP Traps 41-4
IP SLAs Support for CFM 41-5
Configuring Ethernet CFM 41-5
Default Ethernet CFM Configuration 41-5
Ethernet CFM Configuration Guidelines 41-6
Preparing the Ethernet CFM Network 41-6
Configuring Ethernet CFM Service 41-7
Configuring Ethernet CFM Crosscheck 41-8
Configuring IP SLAs CFM Operation 41-9
Manually Configuring an IP SLAs CFM Probe or Jitter Operation 41-10
Configuring an IP SLAs Operation with Endpoint Discovery 41-12
Displaying Ethernet CFM Information 41-13
Understanding the Ethernet OAM Protocol 41-14
OAM Features 41-15
OAM Messages 41-15
Setting Up and Configuring Ethernet OAM 41-16
Default Ethernet OAM Configuration 41-16
Ethernet OAM Configuration Guidelines 41-16
Enabling Ethernet OAM on an Interface 41-16
Enabling Ethernet OAM Remote Loopback 41-17
Configuring Ethernet OAM Link Monitoring 41-18
Configuring Ethernet OAM Remote Failure Indications 41-21
Configuring Ethernet OAM Templates 41-21
Displaying Ethernet OAM Protocol Information 41-24
Understanding E-LMI 41-24
E-LMI Interaction with OAM Manager 41-25
CFM Interaction with OAM Manager 41-25
Configuring E-LMI 41-26
Default E-LMI Configuration 41-26
E-LMI and OAM Manager Configuration Guidelines 41-26
Configuring the OAM Manager 41-27
Enabling E-LMI 41-29