Contents
ix
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Ports in Authorized and Unauthorized States 8-4
IEEE 802.1x Accounting 8-5
IEEE 802.1x Accounting Attribute-Value Pairs 8-5
IEEE 802.1x Host Mode 8-6
Using 802.1x Readiness Check 8-7
Using IEEE 802.1x with Port Security 8-7
Using IEEE 802.1x with VLAN Assignment 8-8
802.1x Switch Supplicant with Network Edge Access Topology (NEAT) 8-9
Configuring IEEE 802.1x Authentication 8-10
Default IEEE 802.1x Configuration 8-11
IEEE 802.1x Configuration Guidelines 8-12
Maximum Number of Allowed Devices Per Port 8-12
Configuring 802.1x Readiness Check 8-13
Configuring IEEE 802.1x Violation Modes 8-14
Configuring IEEE 802.1x Authentication 8-14
Configuring the Switch-to-RADIUS-Server Communication 8-16
Configuring Periodic Re-Authentication 8-17
Manually Re-Authenticating a Client Connected to a Port 8-17
Changing the Quiet Period 8-18
Changing the Switch-to-Client Retransmission Time 8-18
Setting the Switch-to-Client Frame-Retransmission Number 8-19
Setting the Re-Authentication Number 8-20
Configuring the Host Mode 8-20
Resetting the IEEE 802.1x Configuration to the Default Values 8-21
Configuring IEEE 802.1x Accounting 8-21
Configuring 802.1x Switch Supplicant with NEAT 8-22
Displaying IEEE 802.1x Statistics and Status 8-24
CHAPTER
9 Configuring Interfaces 9-1
Understanding Interface Types 9-1
UNI, NNI, and ENI Port Types 9-2
Port-Based VLANs 9-2
Switch Ports 9-3
Access Ports 9-4
Trunk Ports 9-4
Tunnel Ports 9-4
Routed Ports 9-5
Switch Virtual Interfaces 9-5
EtherChannel Port Groups 9-6
To Next Page
Loading...
Need help?
General
