Cisco RV110W Administration Guide

Configuring VPN
Configuring VPN Passthrough
Cisco RV110W Administration Guide 109
5
Exporting Certificates for Admin
The certificate for administrator contains the private key and should be stored in a
safe place as a backup. If the Cisco RV110W configuration is reset to the factory
default settings, this certificate can be imported and restored on the router.
To export a certificate for Admin:
STEP 1 Choose VPN > Certificate Management..
STEP 2 Click Export for Admin.
On a PC, the Device Manager saves the admin.pem file in the C:\Documents and
Settings\userid\My Documents\Downloads.
Exporting Certificates for Client
The certificate for client allows QuickVPN users to securely connect to the
Cisco RV110W. QuickVPN users must place the certificate in the install directory
of the QuickVPN client.
To export a certificate for client:
STEP 1 Choose VPN > Certificate Management..
STEP 2 Click Export for Client.
On a PC, the Device Manager saves the client.pem file in the C:\Documents and
Settings\userid\My Documents\Downloads.
Configuring VPN Passthrough
VPN passthrough allows VPN traffic that originates from VPN clients to pass
through the Cisco RV110W.
To configure VPN passthrough:
STEP 1 Choose VPN > VPN Passthrough.
STEP 2 Choose the type of traffic to allow to pass through the firewall:

Cisco RV110W Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity	10
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity	13 channels
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports	4
Input voltage	12 V
Rack mounting	No
Number of users	32 user(s)
Weight (imperial)	0.61 lbs
Dimensions (WxDxH)	150 x 150 x 30 mm
Operating temperature (T-T)	32 - 104 °F
Compliance industry standards	IEEE 802.3, IEEE 802.3u
Supported data transfer rates	10/100Mbps
Dimensions (W x D x H) (imperial)	5.91 x 5.91 x 1.18 \
WLAN data transfer rates supported	11, 54 Mbit/s
Supported network protocols	PPPoE, DHCP, PPTP, L2TP, IGMP, RSTP
Antennas quantity	2
Antenna gain level (max)	1.8 dBi
Firewall security	VPN
Security algorithms	WEP, WPA, WPA2, WPS
MAC address filtering	-
Product color	Black
Certification	FCC, CE, IC, cUL, Wi-Fi
Storage temperature (T-T)	-20 - 70 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Width	150 mm
Height	30 mm
Weight	300 g