EasyManuals Logo

Cisco RV110W Administration Guide

Cisco RV110W
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
Configuring Networking
Configuring the LAN Settings
Cisco RV110W Administration Guide 36
2
STEP 3 From the VLAN drop-down menu, choose the ID of the VLAN where DMZ is
enabled.
STEP 4 In the Host IP Address field, enter the IP address of the DMZ host. The DMZ host
is the endpoint that receives the redirected packets.
STEP 5 Click Save.
Configuring RSTP
Rapid Spanning Tree Protocol (RSTP) is a network protocol prevents loops in the
network and dynamically reconfigures which physical links should forward frames.
To configure Rapid Spanning Tree Protocol (RTSP):
STEP 1 Choose Networking > LAN > RSTP.
STEP 2 Configure the following settings:
System Priority Choose the system priority from the drop-down
menu. You can choose from a system priority from
0 to 61440 in increments of 4096. Valid values are
0, 4096, 8192, 12288, 16384, 20480, 24576,
28672, 32768, 40960, 45056, 49152, 53248,
57344, and 61440.
The lower the system priority, the more likely the
Cisco RV110W is to become the root in the
spanning tree. The default is 327688.
Hello Time The hello time is the time period that the root of the
spanning tree waits before sending hello
messages. Enter a number from 1 to 10. The default
is 2.
Max Age The max age is the time period that the router waits
to receive a hello message. If the max age is
reached, the router tries to change the spanning
tree. Enter a number from 6 to 40. The default is 20.

Table of Contents

Other manuals for Cisco RV110W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV110W and is the answer not in the manual?

Cisco RV110W Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity10
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity13 channels
Top Wi-Fi standardWi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports4
Input voltage12 V
Rack mountingNo
Number of users32 user(s)
Weight (imperial)0.61 lbs
Dimensions (WxDxH)150 x 150 x 30 mm
Operating temperature (T-T)32 - 104 °F
Compliance industry standardsIEEE 802.3, IEEE 802.3u
Supported data transfer rates10/100Mbps
Dimensions (W x D x H) (imperial)5.91 x 5.91 x 1.18 \
WLAN data transfer rates supported11, 54 Mbit/s
Supported network protocolsPPPoE, DHCP, PPTP, L2TP, IGMP, RSTP
Antennas quantity2
Antenna gain level (max)1.8 dBi
Firewall securityVPN
Security algorithmsWEP, WPA, WPA2, WPS
MAC address filtering-
Product colorBlack
CertificationFCC, CE, IC, cUL, Wi-Fi
Storage temperature (T-T)-20 - 70 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Width150 mm
Height30 mm
Weight300 g

Related product manuals