Cisco RV110W Administration Guide

Configuring Networking
Configuring the LAN Settings
Cisco RV110W Administration Guide 29
2
STEP 2 Click Save.
Configuring the LAN Settings
The default DHCP and TCP/IP settings work for most applications. If you want
another PC on your network to be the DHCP server, or if you want to manually
configure the network settings of all of your PCs, disable DHCP.
Also, instead of using a DNS server, which maps Internet domain names (for
example, www.cisco.com) to IP addresses, you can use a Windows Internet
Naming Service (WINS) server. A WINS server is the equivalent of a DNS server
but uses the NetBIOS protocol to resolve hostnames. The Cisco RV110W includes
the IP address of the WINS server in the DHCP configuration the Cisco RV110W
sends to DHCP clients.
NOTE If the Cisco RV110W is connected to a modem or device that has a configured
network on the same subnet (192.168.1.x), the Cisco RV110W automatically
changes the LAN subnet to a random subnet based on 10.x.x.x, so there is no
conflict with the subnet on the WAN side of the Cisco RV110W.
You can assign an IP address to each additional subnet on the Cisco RV110W.
MTU The Maximum Transmit Unit (MTU) is the size of the
largest packet that can be sent over the network.
The standard MTU value for Ethernet networks is
usually 1500 bytes. For PPPoE connections, the
value is 1492 bytes.
Unless a change is required by your ISP, Cisco
recommends that you choose Auto. The default
MTU size is 1500 bytes.
If your ISP requires a custom MTU setting, choose
Manual and enter the MTU size.
Size Enter the MTU size.

Cisco RV110W Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity	10
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity	13 channels
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports	4
Input voltage	12 V
Rack mounting	No
Number of users	32 user(s)
Weight (imperial)	0.61 lbs
Dimensions (WxDxH)	150 x 150 x 30 mm
Operating temperature (T-T)	32 - 104 °F
Compliance industry standards	IEEE 802.3, IEEE 802.3u
Supported data transfer rates	10/100Mbps
Dimensions (W x D x H) (imperial)	5.91 x 5.91 x 1.18 \
WLAN data transfer rates supported	11, 54 Mbit/s
Supported network protocols	PPPoE, DHCP, PPTP, L2TP, IGMP, RSTP
Antennas quantity	2
Antenna gain level (max)	1.8 dBi
Firewall security	VPN
Security algorithms	WEP, WPA, WPA2, WPS
MAC address filtering	-
Product color	Black
Certification	FCC, CE, IC, cUL, Wi-Fi
Storage temperature (T-T)	-20 - 70 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Width	150 mm
Height	30 mm
Weight	300 g