EasyManuals Logo
Home>Cisco>Firewall>RV110W

Cisco RV110W Administration Guide

Cisco RV110W
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #129 background imageLoading...
Page #129 background image
Administering Your Cisco RV110W
Backing Up and Restoring the System
Cisco RV110W Administration Guide 129
7
STEP 2 Configure this information:
STEP 3 Click Save.
Backing Up and Restoring the System
You can back up custom configuration settings for later restoration or restore from
a previous backup from the Administration > Backup / Restore Settings page.
When the firewall is working as configured, you can back up the configuration for
restoring later. During backup, your settings are saved as a file on your PC. You can
restore the firewall settings from this file.
Time Zone Select your time zone, relative to Greenwich Mean
Time (GMT).
Adjust for Daylight
Savings Time
If supported for your region, check the Adjust for
Daylight Savings Time box.
This check box is enabled if you click Auto in the
Set Date and Time field below.
Daylight Saving Mode Choose either By date (you enter the specific date
on which daylight saving mode starts) or Recurring
(you enter the month, week, day of week, and time
on which daylight saving time starts). Enter the
appropriate information in the “from” and “to” fields.
Daylight Saving Offset Choose the offset from Coordinated Universal
Time (UTC) from the drop-down menu.
Set Date and Time Select how to set the date and time.
NTP Server To use the default NTP servers, click the Use
Default button.
To use a specific NTP server, click the User
Defined NTP Server and enter the fully-qualified
domain name or IP address of the NTP servers in
the two available fields.
Enter Date and Time Enter the date and time.

Table of Contents

Other manuals for Cisco RV110W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV110W and is the answer not in the manual?

Cisco RV110W Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity10
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity13 channels
Top Wi-Fi standardWi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports4
Input voltage12 V
Rack mountingNo
Number of users32 user(s)
Weight (imperial)0.61 lbs
Dimensions (WxDxH)150 x 150 x 30 mm
Operating temperature (T-T)32 - 104 °F
Compliance industry standardsIEEE 802.3, IEEE 802.3u
Supported data transfer rates10/100Mbps
Dimensions (W x D x H) (imperial)5.91 x 5.91 x 1.18 \
WLAN data transfer rates supported11, 54 Mbit/s
Supported network protocolsPPPoE, DHCP, PPTP, L2TP, IGMP, RSTP
Antennas quantity2
Antenna gain level (max)1.8 dBi
Firewall securityVPN
Security algorithmsWEP, WPA, WPA2, WPS
MAC address filtering-
Product colorBlack
CertificationFCC, CE, IC, cUL, Wi-Fi
Storage temperature (T-T)-20 - 70 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Width150 mm
Height30 mm
Weight300 g

Related product manuals