Cisco RV110W Administration Guide

Configuring the Wireless Network
Configuring Basic Wireless Settings
Cisco RV110W Administration Guide 63
3
Configuring Basic Wireless Settings
You can use the Basic Settings page (Wireless > Basic Settings) to configure
basic wireless settings.
To configure basic wireless settings:
STEP 1 Choose Wireless > Basic Settings.
STEP 2 In the Radio field, check Enable to turn on the wireless radio. By default there is
only one wireless network enabled, ciscosb1.
STEP 3 In the Wireless Network Mode field, choose one of these options from the
drop-down menu:
Wireless
Isolation
with SSID
Disabled Disabled Disabled Disabled
WMM Enabled Enabled Enabled Enabled
WPS
Hardware
Button
Enabled Disabled Disabled Disabled
1. When using the Setup Wizard, select Best Security or Better Security to protect the
Cisco RV110W from unauthorized access.
SSID Name ciscosb1 ciscosb2 ciscosb3 ciscosb4
B/G/N-Mixed Choose this option if you have Wireless-N,
Wireless-B, and Wireless-G devices in your
network. This is the default setting (recommended).
B Only Choose this option if you have only Wireless-B
devices in your network.
G Only Choose this option if you have only Wireless-G
devices in your network.
N Only Choose this option if you have only Wireless-N
devices in your network.

Cisco RV110W Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity	10
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity	13 channels
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports	4
Input voltage	12 V
Rack mounting	No
Number of users	32 user(s)
Weight (imperial)	0.61 lbs
Dimensions (WxDxH)	150 x 150 x 30 mm
Operating temperature (T-T)	32 - 104 °F
Compliance industry standards	IEEE 802.3, IEEE 802.3u
Supported data transfer rates	10/100Mbps
Dimensions (W x D x H) (imperial)	5.91 x 5.91 x 1.18 \
WLAN data transfer rates supported	11, 54 Mbit/s
Supported network protocols	PPPoE, DHCP, PPTP, L2TP, IGMP, RSTP
Antennas quantity	2
Antenna gain level (max)	1.8 dBi
Firewall security	VPN
Security algorithms	WEP, WPA, WPA2, WPS
MAC address filtering	-
Product color	Black
Certification	FCC, CE, IC, cUL, Wi-Fi
Storage temperature (T-T)	-20 - 70 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Width	150 mm
Height	30 mm
Weight	300 g