EasyManuals Logo
Home>Cisco>Firewall>RV110W

Cisco RV110W Administration Guide

Cisco RV110W
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Configuring Networking
Configuring the LAN Settings
Cisco RV110W Administration Guide 37
2
STEP 3 In the Setting Table, configure the following settings:
STEP 4 Click Save.
Port Management
You can configure the speed and flow control settings of the Cisco RV110W LAN
ports.
To configure port speeds and flow control:
STEP 1 Choose Networking > Port Management.
Forward Delay The forward delay is the interval after which an
interface changes from the blocking to forwarding
state. Enter a number from 4 to 30. The default is
15.
Force Version Select the default protocol version to use. Select
Normal (use RSTP) or Compatible (compatible
with old STP). The default is Normal.
Protocol Enable Check to enable RSTP on the associated port.
RSTP is disabled by default.
Edge Check to specify that the associated port is an
edge port (end station). Uncheck to specify that the
associated port is a link (bridge) to another STP
device. Edge port is enabled by default.
Path Cost Enter the RSTP path cost for the designated ports.
Use 0 for the default value (the Cisco RV110W
automatically determines the path value). You can
also enter a number from 2 to 200000000.

Table of Contents

Other manuals for Cisco RV110W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV110W and is the answer not in the manual?

Cisco RV110W Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity10
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity13 channels
Top Wi-Fi standardWi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports4
Input voltage12 V
Rack mountingNo
Number of users32 user(s)
Weight (imperial)0.61 lbs
Dimensions (WxDxH)150 x 150 x 30 mm
Operating temperature (T-T)32 - 104 °F
Compliance industry standardsIEEE 802.3, IEEE 802.3u
Supported data transfer rates10/100Mbps
Dimensions (W x D x H) (imperial)5.91 x 5.91 x 1.18 \
WLAN data transfer rates supported11, 54 Mbit/s
Supported network protocolsPPPoE, DHCP, PPTP, L2TP, IGMP, RSTP
Antennas quantity2
Antenna gain level (max)1.8 dBi
Firewall securityVPN
Security algorithmsWEP, WPA, WPA2, WPS
MAC address filtering-
Product colorBlack
CertificationFCC, CE, IC, cUL, Wi-Fi
Storage temperature (T-T)-20 - 70 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Width150 mm
Height30 mm
Weight300 g

Related product manuals