EasyManuals Logo

Cisco RV110W Administration Guide

Cisco RV110W
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Configuring Networking
Cloning the MAC Address
Cisco RV110W Administration Guide 39
2
Cloning the MAC Address
Sometimes, you may need to set the MAC address of the Cisco RV110W WAN
port to be the same MAC address as your PC or some other MAC address. This is
called MAC address cloning.
For example, some ISPs register your computer NIC card MAC address when the
service is first installed. When you place a router behind the cable modem or DSL
modem, the MAC address from the Cisco RV110W WAN port is not recognized by
the ISP.
In this case, to configure your Cisco RV110W to be recognized by the ISP, clone
the MAC address of the WAN port to be the same as your computer MAC address.
To configure a MAC address clone:
STEP 1 Choose Networking > MAC Address Clone.
STEP 2 In the MAC Address Clone field, check Enable to enable MAC address cloning.
STEP 3 To set the MAC address of the Cisco RV110W WAN port, do one of the following:
To set the MAC address of the WAN port to your PC MAC address, click
Clone My PC’s MAC.
To specify a different MAC address, enter it in the MAC Address field.
STEP 4 Click Save.

Table of Contents

Other manuals for Cisco RV110W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV110W and is the answer not in the manual?

Cisco RV110W Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity10
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity13 channels
Top Wi-Fi standardWi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports4
Input voltage12 V
Rack mountingNo
Number of users32 user(s)
Weight (imperial)0.61 lbs
Dimensions (WxDxH)150 x 150 x 30 mm
Operating temperature (T-T)32 - 104 °F
Compliance industry standardsIEEE 802.3, IEEE 802.3u
Supported data transfer rates10/100Mbps
Dimensions (W x D x H) (imperial)5.91 x 5.91 x 1.18 \
WLAN data transfer rates supported11, 54 Mbit/s
Supported network protocolsPPPoE, DHCP, PPTP, L2TP, IGMP, RSTP
Antennas quantity2
Antenna gain level (max)1.8 dBi
Firewall securityVPN
Security algorithmsWEP, WPA, WPA2, WPS
MAC address filtering-
Product colorBlack
CertificationFCC, CE, IC, cUL, Wi-Fi
Storage temperature (T-T)-20 - 70 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Width150 mm
Height30 mm
Weight300 g

Related product manuals