Administering Your Cisco RV110W
Setting Password Complexity
Cisco RV110W Administration Guide 117
7
Setting Password Complexity
The Cisco RV110W can enforce minimum password complexity requirement for
password changes.
To configure password complexity settings:
STEP 1 Choose Administration > Password Strength.
STEP 2 In the Password Complexity Settings field, check Enable.
STEP 3 Configure password complexity settings:
STEP 4 Click Save.
Minimum Password
Length
Enter the minimum password length
(0-64 characters).
Minimum number of
character classes
Enter a number representing one of the following
character classes:
• Uppercase letters.
• Lowercase letters.
• Numbers.
• Special characters available on a standard
keyboard.
By default, passwords must contains characters
from at least three of these classes.
The new password must
be different than the
current one
Check Enable to require that new passwords differ
from the current password.
Password Aging Check Enable to expire passwords after a
specified time.
Password aging time Enter the number of days after which the password
expires (1–365). The default is 180 days.