EasyManuals Logo
Home>Cisco>Firewall>RV110W

Cisco RV110W Administration Guide

Cisco RV110W
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Introduction
Connecting to Your Wireless Network
Cisco RV110W Administration Guide 21
1
Connecting to Your Wireless Network
To connect a device (such as a computer) to your wireless network, configure the
wireless connection on the device with the wireless security information you
configured for the Cisco RV110W by using the Setup Wizard.
The following steps are provided as an example; you may need to configure your
device differently. For instructions that are specific to your device, consult its
documentation.
STEP 1 Open the wireless connection settings window or program for your device.
Your computer may have special software installed to manage wireless
connections, or you may find wireless connections under the Control Panel in the
Network Connections or Network and Internet window. (The location depends
on your operating system.)
STEP 2 Enter the network name (SSID) you chose for your network in the Setup Wizard.
STEP 3 Choose the type of encryption and enter the security key that you specified in the
Setup Wizard.
If you did not enable security (not recommended), leave the wireless encryption
fields that were configured with the security type and passphrase blank.
STEP 4 Verify your wireless connection and save your settings.

Table of Contents

Other manuals for Cisco RV110W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV110W and is the answer not in the manual?

Cisco RV110W Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity10
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity13 channels
Top Wi-Fi standardWi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports4
Input voltage12 V
Rack mountingNo
Number of users32 user(s)
Weight (imperial)0.61 lbs
Dimensions (WxDxH)150 x 150 x 30 mm
Operating temperature (T-T)32 - 104 °F
Compliance industry standardsIEEE 802.3, IEEE 802.3u
Supported data transfer rates10/100Mbps
Dimensions (W x D x H) (imperial)5.91 x 5.91 x 1.18 \
WLAN data transfer rates supported11, 54 Mbit/s
Supported network protocolsPPPoE, DHCP, PPTP, L2TP, IGMP, RSTP
Antennas quantity2
Antenna gain level (max)1.8 dBi
Firewall securityVPN
Security algorithmsWEP, WPA, WPA2, WPS
MAC address filtering-
Product colorBlack
CertificationFCC, CE, IC, cUL, Wi-Fi
Storage temperature (T-T)-20 - 70 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Width150 mm
Height30 mm
Weight300 g

Related product manuals