Configuring VPN
VPN Clients
Cisco RV110W Administration Guide 98
5
STEP 2 Enter this information:
STEP 3 Click Save.
To edit the settings of a PPTP user, check its box and click Edit. When you are
done, click Save.
To delete a PPTP user, check its box and click Delete.
Creating and Managing QuickVPN Users
To create QuickVPN users:
STEP 1 In the VPN Client Setting Table, click Add Row.
STEP 2 Enter this information:
STEP 3 Click Save.
To edit the settings of a QuickVPN user, check its box and click Edit. When you are
done making changes, click Save.
Enable Check to enable the user.
Username Enter the username of the PPTP user
(4 to 32 characters).
Password Enter the password (4 to 32 characters).
Protocol Choose PPTP from the drop-down menu.
Enable Check to enable the user.
Username Enter the username of the QuickVPN user
(4 to 32 characters).
Password Enter the password (4 to 32 characters).
Allow User to Change
Password
Check to allow the user to change the password.
Protocol Choose QuickVPN from the drop-down menu.