Cisco RV120W Administration Guide

Administering Your Cisco RV120W
Using the Management Interface
Cisco RV120W Administration Guide 120
7
remote means to monitor and control network devices, and to manage
configurations, statistics collection, performance, and security. To allow remote
management of the Cisco RV120W by SNMP, under Remote SNMP, check Enable.
Configuring User Accounts
The Cisco RV120W supports two user accounts for administering and viewing
settings: an administrative user (default user name: “admin”) and a “guest” user
(default user name: “guest”). The guest account has read-only access. You can set
and change the username and password for both the administrator and guest
accounts.
To configure the user accounts:
STEP 1 Choose Administration > Management Interface > User Accounts.
STEP 2 Click either Edit Admin Settings or Edit Guest Settings.
STEP 3 Enter the new username.
STEP 4 Enter the old password.
STEP 5 Enter the new password. It is recommended that passwords contains no
dictionary words from any language, and are a mix of letters (both uppercase and
lowercase), numbers, and symbols. The password can be up to 30 characters.
STEP 6 Click Save.
Setting the Session Timeout Value
The timeout value is the number of minutes of inactivity that are allowed before the
Device Manager session is ended. This can be configured for the Admin and
Guest accounts:
STEP 1 Choose Administration > Session Timeout.
STEP 2 In the Administrator Inactivity Timeout field, enter the number, in minutes, before an
administrator login session times out due to inactivity.

Cisco RV120W Specifications

General

Ethernet LAN	Yes
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity	10
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Channels quantity	13 channels
WLAN data transfer rate (max)	300 Mbit/s
Input current	1 A
Input voltage	12 V
xDSL connection	No
Dimensions (WxDxH)	150 x 150 x 34 mm
Networking features	Fast Ethernet, WLAN, WAN
Operating temperature (T-T)	32 - 104 °F
Security algorithms	802.1x RADIUS, EAP, WPA2
Antennas quantity	2
Antenna gain level (max)	1.8 dBi
Ethernet LAN (RJ-45) ports	4
Certification	FCC B, CE, IC, Wi-Fi
Product color	Black
Storage temperature (T-T)	-20 - 70 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Weight	500 g