Cisco RV120W Administration Guide

Configuring the Firewall
Configuring Access Rules
Cisco RV120W Administration Guide 67
4
Configuring Access Rules
Configure access rules to control traffic to and from your network. To configure
access rules, choose Firewall > Access Rules. All configured firewall rules on the
Cisco RV120W are displayed in the Access Rule Table.
Configuring the Default Outbound Policy
You can configure the default outbound policy for the traffic that is directed from
your secure network (LAN) to the Internet. The default
inbound policy for traffic
flowing from the Internet to your LAN is always blocked and cannot be changed.
The
default outbound policy applies to traffic that is not covered by the specific
firewall rules that you have configured. For example, you may have specific
firewall rules restricting outbound instant messaging and video traffic, but all other
traffic would be permitted if you choose allow as the default outbound policy.
To configure the default outbound policy:
STEP 1 Choose Firewall > Access Rules.
STEP 2 Under Default Outbound Policy, choose Allow or Block. Allow permits traffic from
your LAN to the Internet. Block does not permit traffic from your LAN to the
Internet.
STEP 3 Click Save.
Creating an Access Rule
Access rules specify the type of traffic that is allowed into and out of your
network. To create access rules:
STEP 1 Choose Firewall > Access Rules.
STEP 2 Click Add Rule.
STEP 3 Under Connection Type, choose the destination of traffic covered by this rule:
• Inbound—Traffic from the Internet (WAN) to your network (LAN)
• Outbound—Traffic from your network (LAN) to the Internet (WAN)

Cisco RV120W Specifications

General

Ethernet LAN	Yes
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity	10
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Channels quantity	13 channels
WLAN data transfer rate (max)	300 Mbit/s
Input current	1 A
Input voltage	12 V
xDSL connection	No
Dimensions (WxDxH)	150 x 150 x 34 mm
Networking features	Fast Ethernet, WLAN, WAN
Operating temperature (T-T)	32 - 104 °F
Security algorithms	802.1x RADIUS, EAP, WPA2
Antennas quantity	2
Antenna gain level (max)	1.8 dBi
Ethernet LAN (RJ-45) ports	4
Certification	FCC B, CE, IC, Wi-Fi
Product color	Black
Storage temperature (T-T)	-20 - 70 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Weight	500 g