Cisco RV120W - Ipsec Connection Status

Viewing the Cisco RV120W Status
IPsec Connection Status
Cisco RV120W Administration Guide 143
8
The Wireless Statistics page displays this information:
NOTE The counters are reset when the device is restarted.
IPsec Connection Status
The IPsec Connection Status page displays the status of IPsec connections.
To view the status of IPsec connections:
STEP 1 Choose Status > IPsec Connection Status.
STEP 2 Click Stop.
STEP 3 In the Poll Interval field, enter the number of seconds the router waits before
updating the information on this page.
STEP 4 Click Start to restart automatic refresh at the specified poll interval.
SSID The name of the wireless network.
Packets The number of received/sent wireless packets
reported to the radio over all configured and active
SSIDs.
Bytes The number of received/sent bytes of information
reported to the radio, over all configured APs.
Errors The number of received/sent packet errors
reported to the radio, over all configured APs.
Dropped The number of received/sent packets dropped by
the radio, over all configured APs.
Multicast The number of multicast packets sent over this
radio.
Collisions The number of packet collisions reported to the AP.