EasyManuals Logo
Home>Cisco>Firewall>RV120W

Cisco RV120W Administration Guide

Cisco RV120W
163 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
Administering Your Cisco RV120W
Configuring the Discovery Settings
Cisco RV120W Administration Guide 130
7
STEP 5 Under Logging Policy, choose the type of logging policy. (See Configuring
Logging Policies, page 127.) By default, only IPsec VPN logs are enabled. Others
are disabled.
STEP 6 If you want the router to send logs to a Syslog server, check the box next to a
syslog server field and enter the IP address or Internet Name of the Syslog server
in the Syslog Server field. Choose the logging policy for each syslog server. You
can configure up to 8 syslog servers.
STEP 7 Click Save.
Configuring the Discovery Settings
The Cisco RV120W supports two types of discovery protocols: Bonjour and UPnP.
Bonjour is a service advertisement and discovery protocol. Universal Plug and
Play (UPnP) is a networking protocol that allows devices to discover each other
and communicate on the network.
Configuring Bonjour
To configure Bonjour:
STEP 1 Choose Administration > Discovery Settings > Discovery - Bonjour.
STEP 2 Check the Enable box to enable Bonjour on the router. Unchecking this will disable
Bonjour.
STEP 3 In the Bonjour Interface Control Table, you can see on which VLANs Bonjour is
enabled. For example, Bonjour is by default enabled on the default VLAN ID 1. That
means that the Cisco RV120W advertises itself to all devices connected to it on
VLAN 1, and devices joining the network can connect to the Cisco RV120W. If you
have other VLANs created on your network, you can enable Bonjour on those
VLANs too. (See Configuring Virtual LAN (VLAN) Membership, page 30 for
more information.)
STEP 4 Click Save.

Table of Contents

Other manuals for Cisco RV120W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV120W and is the answer not in the manual?

Cisco RV120W Specifications

General IconGeneral
Ethernet LANYes
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity10
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Channels quantity13 channels
WLAN data transfer rate (max)300 Mbit/s
Input current1 A
Input voltage12 V
xDSL connectionNo
Dimensions (WxDxH)150 x 150 x 34 mm
Networking featuresFast Ethernet, WLAN, WAN
Operating temperature (T-T)32 - 104 °F
Security algorithms802.1x RADIUS, EAP, WPA2
Antennas quantity2
Antenna gain level (max)1.8 dBi
Ethernet LAN (RJ-45) ports4
CertificationFCC B, CE, IC, Wi-Fi
Product colorBlack
Storage temperature (T-T)-20 - 70 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Weight500 g

Related product manuals