EasyManuals Logo
Home>Cisco>Firewall>RV120W

Cisco RV120W Administration Guide

Cisco RV120W
163 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
Configuring the Wireless Network
A Note About Wireless Security
Cisco RV120W Administration Guide 53
3
Enable encryption
Encryption protects data transmitted over a wireless network. Wi-Fi
Protected Access (WPA/WPA2) and Wired Equivalency Privacy (WEP) offer
different levels of security for wireless communication. Currently, devices
that are Wi-Fi certified are required to support WPA2, but are not required
to support WEP.
A network encrypted with WPA/WPA2 is more secure than a network
encrypted with WEP, because WPA/WPA2 uses dynamic key encryption.
To protect the information as it passes over the airwaves, you should enable
the highest level of encryption supported by your network equipment.
WEP is an older encryption standard and may be the only option available
on some older devices that do not support WPA.
Keep wireless routers, access points, or gateways away from exterior walls
and windows.
Turn wireless routers, access points, or gateways off when they are not
being used (at night, during vacations).
Use strong passphrases that are at least eight characters in length.
Combine letters and numbers to avoid using standard words that can be
found in the dictionary.
General Network Security Guidelines
Wireless network security is useless if the underlying network is not secure. Cisco
recommends that you take the following precautions:
Password protect all computers on the network and individually password
protect sensitive files.
Change passwords on a regular basis.
Install anti-virus software and personal firewall software.
Disable file sharing (peer-to-peer). Some applications may open file sharing
without your consent and/or knowledge.

Table of Contents

Other manuals for Cisco RV120W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV120W and is the answer not in the manual?

Cisco RV120W Specifications

General IconGeneral
Ethernet LANYes
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity10
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Channels quantity13 channels
WLAN data transfer rate (max)300 Mbit/s
Input current1 A
Input voltage12 V
xDSL connectionNo
Dimensions (WxDxH)150 x 150 x 34 mm
Networking featuresFast Ethernet, WLAN, WAN
Operating temperature (T-T)32 - 104 °F
Security algorithms802.1x RADIUS, EAP, WPA2
Antennas quantity2
Antenna gain level (max)1.8 dBi
Ethernet LAN (RJ-45) ports4
CertificationFCC B, CE, IC, Wi-Fi
Product colorBlack
Storage temperature (T-T)-20 - 70 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Weight500 g

Related product manuals