EasyManuals Logo
Home>Cisco>Firewall>RV120W

Cisco RV120W Administration Guide

Cisco RV120W
163 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #143 background imageLoading...
Page #143 background image
Administering Your Cisco RV120W
Upgrading Firmware
Cisco RV120W Administration Guide 134
7
Upgrading Firmware
!
CAUTION During a firmware upgrade, do not try to go online, turn off the device, shut down
the PC, or interrupt the process in any way until the operation is complete. This
process takes about a minute, including the reboot process. Interrupting the
upgrade process at specific points when the flash is being written to may corrupt
the flash memory and render the router unusable.
You can upgrade to a newer firmware version from the Administration > Firmware
Upgrade page. To upgrade:
STEP 1 Click Browse, locate and select the downloaded firmware, and click Upload.
STEP 2 (Optional) Check the box to reset all configuration and settings to the default
values. Do not check this box if you want to keep any settings you have changed
on the router!
STEP 3 Click Start Firmware Upgrade. After the new firmware image is validated, the new
image is written to flash, and the router is automatically rebooted with the new
firmware. Choose Status > System Summary to make sure the router installed the
new firmware version.
Rebooting the Cisco RV120W
To reboot the router, choose Administration > Reboot Router. Click Reboot.

Table of Contents

Other manuals for Cisco RV120W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV120W and is the answer not in the manual?

Cisco RV120W Specifications

General IconGeneral
Ethernet LANYes
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity10
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Channels quantity13 channels
WLAN data transfer rate (max)300 Mbit/s
Input current1 A
Input voltage12 V
xDSL connectionNo
Dimensions (WxDxH)150 x 150 x 34 mm
Networking featuresFast Ethernet, WLAN, WAN
Operating temperature (T-T)32 - 104 °F
Security algorithms802.1x RADIUS, EAP, WPA2
Antennas quantity2
Antenna gain level (max)1.8 dBi
Ethernet LAN (RJ-45) ports4
CertificationFCC B, CE, IC, Wi-Fi
Product colorBlack
Storage temperature (T-T)-20 - 70 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Weight500 g

Related product manuals